A Jiffy Lube radiator coolant flush costs nearly $99.99.
Also, along with the full Diagnosis and visual inspection, you get a free exchange and brand new antifreeze.
The cost also includes a diagnosis and visual inspection.
Coolant flush cost –
The average expected cost of a coolant flush could be somewhere between $100 and $150 (source-highly rated mechanics).
- According to Kauffeld, this includes four gallons of coolants
- This package also includes a conditioner and a cleaner
- As per Costhelper.com, at a standard shop, expect a cost of around $54 to $144 for a radiator flush
- This is the combined cost at the typical shops with average pricing of $99.
Significance of Coolant flushes –
While we do not require to change it much often as the engine oil, but a coolant also needs time to time changes, called Coolant Flush.
Coolant must be flushed because –
- It breaks down over the years
- Then over the years, it loses its innate ability to serve its purpose
- The main purpose is maintaining optimum temperatures of the engine and preventing corrosions.
Jiffy lube flushes the coolant as well –
Jiffy Lube offers a fantastic Radiator Flush, which keeps the engine always in proper order with a fresh supply of the radiator.
This also keeps the antifreeze from protecting the fluids.
Lastly, coolant flushing assists in the removal of containments.
Related Questions and Frequently Asked Questions (FAQ)
Q1.) How can I know if I need a coolant flush?
Answer: Yes
Some signs are easy to catch
- Immediate Radiator Flush
- Coolant leaking underneath the car
- A grinding or knocking engine noise
- Visible debris in your coolant
- Steam / Odd smell rising from the hood
Q2.) What can happen if we don’t flush a coolant?
Answer: When this happens, the coolant, on the contrary, can behave as extremely corrosive.
Some people believe that a vehicle’s coolant might not be flushed properly.
Just top it off simply and enjoy.
It is very similar to the car’s oil, and the coolant can break over time.
The engine can corrode and even wear down if the coolant is broken down or the vehicle is not serviced properly.
This is also pretty common to see in all old vehicles.
Q3.) Can we add a coolant without flushing?
Answer: Yes, it is absolutely fine to do so.
One can add coolant to the overflowing reservoir, just don’t overfill it, which is very obvious.
Then, check the engine heat level, whether it is hot or cold?
If it is on the colder side, then just fill up to a minimum level.
Q4.) How to change the coolant myself?
Answer: Yes, but it can take about an hour to do so.
Invest in an air-powered refilling tool that removes any air pockets from the cooling system while we fill.
One can save around $50 on the first coolant change and save over $100+ for subsequent filling.
Q5.) How to do a coolant flush at home?
Answer: Yes, do as follow, and you can do it easily
- Begin with disconnecting the lower radiator hose from the main radiator
- Then drain the radiator alone normally
- Drain up to 40 – 45% of the coolant
- After the first successful drain, make sure to fill the system with water as much as possible
- Warm the engine and let it cool
- Then simply drain the radiator
- Fill up to the brim with water
Q6.) How often do you flush your engine?
Answer: 5k to 10k Miles for old vehicles, most modern vehicles after 35K+ before a flush need
- When one removes the buildup in the engine, it runs more efficiently
- Due to the step above, it often runs much better
- Many quick lube type places normally say that they do the flush after 5K to 10K miles
- This is not true for anyone as most modern vehicles can go much farther than this range
Q7.) What is the right time to change your coolant?
Answer: 30K miles – 60K miles as per vehicle make
If you ask any of the typical mechanics, they will recommend changing the coolant every 30K miles or so.
But with time and tide, the sophistication in vehicles is high.
An owner’s manual can provide more insights that recommend changing the coolant/ antifreeze after every 60K miles and then every 30K miles.
Q8.) Can Jiffy Lube change the engine coolant?
Answer: Yes, the Jiffy Lube removes the used engine coolant.
Based on the manufacturer’s recommendation and/ or test’s results, Jiffy Lube does this.
They then replace it with a coolant that can meet or exceed your manufacturer’s specifications.
Also, it properly disposes of the used fluid.
Q9.) How much can we expect for the pricing of Firestone’s coolant flush?
Answer: As per research by CostHelper, readers report paying $54 – $144 for radiator flushes at any standard shop.
The average cost is around $99.
At a dealership, expect a rate of $70 – $175 and an average cost of around $109.
DIY supplies are pretty cheap and cost around $10 – $50, all depending on what is included.
Q10.) How to flush your radiator at home?
Answer: Follow the given protocol,
- Start by draining all the old antifreeze in the radiator into a drainage pan to begin flushing a radiator
- After then, seal the drain valve and pour one full bottle of radiator cleaner
- 1 gallon of distilled water into the radiator reservoir
- Then, turn your vehicle on with the full blast heat for 5 minutes
Q11.) How often should the coolant be flushed?
Answer: The recommended time is 40K miles by most mechanics.
One can also check their vehicle owner’s manual for the recommended coolant change intervals.
So it is important to flush your cooling system if you don’t remember when the last time it was done.
Q12.) How long can we expect the coolant in a car?
Answer: Most coolants are made of antifreeze and water from your household taps.
When mixed in a 50: 50, they can last long for around three years.
And, if the solution has antifreeze and distilled water, the same can last for around five years.
Q13.) How much does the coolant flush cost at Walmart?
Answer: The radiator flush cost at Walmart is somewhere between $112 to $879.
One noteworthy thing is that there is no significant difference between Walmart’s pricing and other company’s prices.
And Walmart offers only a limited warranty.
Q14.) Does coolant affect the AC as well?
Answer: Freon or coolant is one of those chemicals in the Air conditioning system which cools the air.
If one puts more coolant in their systems and still not getting enough of the cool air, then check for some other issues.
Thoroughly check your AC hoses and other Air Conditioners parts.
Q15.) Is radiator and engine coolant the same thing?
Answer: Yes!
It is important to choose the correct radiator fluid for your vehicle.
Because there exist many types and formulations which are distinguished many categories which you can research as per need.
Such as the amount of corrosion inhibitor used in the mixture.
Corrosion inhibitors can be either organic, inorganic, or hybrid.
Q16.) How long should I drive my car after the coolant is added?
Answer: 15 minutes, Minimum!
There is a personal risk of being sprayed with hot water or a steam gun once you open the hood.
So, always be precautious.
Q17.) Does coolant helps cool off the car as well?
Answer: The coolant help absorbs the heat as otherwise, it can lead to the melting of the vehicle’s rubber and plastic components.
Also, it keeps your vehicle’s rubber and plastic components in shape for a long.
Lastly, it helps cool down the engine by reducing the temperature of the fluid.
Q18.) What happens if one puts the wrong coolant in the cars?
Answer: Yes, it can affect the performance by leaps and bounds.
- It will hinder the car’s performance
- It can also increase corrosion in the radiator
- Other possible damages to the radiator, like Water pump, radiator hoses, cylinder gaskets, and more.
Final Verdict –
Have you ever felt helpless and hopeless and stranded for long on the road while your vehicle steams?
Or you are stranded in the middle of the road while your engine fluid remains frozen.
Not fun!
To counter this, go for Jiffy Lube’s Radiator Flush to keep your engines with a fresh supply of antifreeze.
The antifreeze is bound to keep fluids from freezing and the flush, and this will help to remove containments.
Does your engine run hotter than other days normally?
Or the temperature slowly creeps into a higher range as you move through the crap road?
These all are signs of leakages and smell like boiling maple syrup or see greenish or an orange fluid pooling beneath the vehicle.
Be careful when you are going the DIY way as it can be dangerous, so wear proper protective clothing. Also, be extra curious when it comes to the handling of coolants and other auto chemicals.
A small accident can be dangerous forever,
However, You can save money as well on DIY projects, so use your mind accordingly,
All you need is a properly functioning cooling system that can circulate everything with precision.
Thanks for reading!