There isn’t any method to determine the security system’s installer code for most of Vivint’s security system as such.
As we all know, these alarm companies often change the codes from time to time to prevent any serious programming changes to the system.
This is true, especially on the user side more.
However, many people can change their installer code for a variety of reasons, like a change in brand.
What Is the Installer Code For Vivint?
2203 is the default installer code on the Vivint security system.
Especially in the 2GiG GC panels, the default panel’s installer code can be 2580 for doing any code changes or doing any change to the master code itself.
Are you changing the code on the Vivint door lock?
Follow the steps below and do a quick code change for the Vivint door lock –
- Begin by reaching the home screen
- Tap the menu on the above screen, which is there in the lower right corner
- Tap on users and then enter the four-digit pin code
- Then again, select the user you want to edit for and make sure by taking care of to toggle on the feature of the separate lock PIN.
- Go and select the LOCK PIN by adding the door lock to an area that the user wants to gain access for
Reprogramming the Vivint Lock
Give below is the in-depth walkthrough for calibrating the given deadbolt properly
- Begin by sliding the backplate off, which is there on the back of the deadbolt
- Then, remove the battery pack
- Wait for around 10 seconds before the next step
- Now, press and hold in position the Lock button, which is there on the deadbolt keypad
- Then, replace the battery pack as well
- You will notice a loud beep
- Lastly, release the lock button only when the motor of the deadbolt begins t make some noise
Resetting the Vivint control panel
Begin by remounting and powering up the panel and lining it to the bottom of the panel.
Snap them all to back in place while being at the backplate panel.
Then, simply replace the top panel’s screw and plug in the panel back to the wall.
You should wait for 10 to 15 mins prior to settling the whole process.
After that particular time, one will see that the panel has now powered up perfectly.
Changing the codes right on a Kwikset door lock
One can easily change the codes on a Kwikset door lock as follow.
- Start by pressing the PROGRAM button once
- Then enter the new four digits into the eight-digit code the user wants and press the LOCK button.
- Now, press the PROGRAM button twice and the same code as earlier.
- Once again, press the LOCK button once
PS – If even after doing all this, the old code is still there and not gone, you have to perform a hard reset of the given unit.
Some other questions,
Related questions and Frequently Asked Questions (FAQs)
Question 1 – How can one enter a Weiser lock code?
Answer: Do as follow,
- Press the program button situated on the interior unit
- Enter the 4 or 8 digit code right onto the keyboard
- Press the lock button, which will save the code, and lastly, press the program button twice
Question 2 – How can one reset a smart door lock?
Answer: Many people do a factory reset from time to time which deletes all locks stored on the system.
Use a smart key tool and hold the program button for 30 seconds, then press and release it.
Question 3 – How to put a lock on the Vivint door?
Answer: Find a wrench icon and enter a 4-digit PIN to begin.
Then go to the device and click the same you want to add, like the light module or thermostat.
Question 4 – How much do the Vivint smart locks cost?
Answer: The minimal pricing begins from $49.99 a month and around $600 for the purchase of any equipment.
Question 5 – How much does a Vivint system cost?
Answer: You can easily get a basic security plan of Vivint starting at $29.99/ month and the second plan for $39.99/ month.
One can enjoy 24/7 professional home monitoring via some smart pieces of equipment and great customer support.
Question 6 – Does Vivint uses a Z Wave?
Answer: Yes
It is compatible with most smart electronics like Amazon Alexa, Google Home, thermostats, etc.
Question 7 – How can one reset the combinations lock if you forget the code?
Answer: It is a very simple process where one just needs to set the dial to 000.
- After that, simply rotate the shackle to a 90-degree angle from the lock position.
- Then, push the shackle down and set your desirable code.
- Pull the shackle back up and turn it back once again to the same lock position.
Question 8 – What smart lock does a Vivint possess?
Answer: Vivint uses the famous Kwikset smart locks that allow two-way function both as a deadbolt and a regular door handle as well.
One can listen to the Vivint alarm’s sound after every three incorrect attempts easily.
Question 9 – What is a Vivint master code?
Answer: The default master code is 1111.
On the Vivint 2GIG GC2 model, simply go to security, and from there to the menu and to toolbox and enter this default code to reach the user management point.
Question 10 – How to add a device to Vivint?
Answer: Press the home button on the touchscreen panel of your Vivint’s security system.
Select the services button and the wrench icon.
Enter the four-digit pin and then tap add devices.
Question 11 – What is the installer code for 2GIG?
Answer: 1561 is the panel code for the 2GIG, which is already there by default.
This is different than other models which have default codes like 1111 or 1568
Question 12 – How to find the DSC installer code?
Answer: It is easy to find the DSC installer code and is right there on the default booklet like 5555, 1500, etc.
For getting into any kind of programming, press *8 and then the installer code.
Question 13 – What do you mean by a default installer code?
Answer: 5555 is the most famous and apt default installer code.
The code is required to get into any kind of DSC programming mode for another kind of panel change.
Question 14 – What is an alarm installer and master code?
Answer: An alarm installer code is for going into the installer programming mode.
This mode helps to make changes to the function and system together.
On the other hand, a master code helps the arming and disarming purposes.
Question 15 – How to get your Vivint pin?
Answer: Simply go to alarm.com and press login.
From there, enter similar login details, i.e., the username and password you put during the Vivint account creation.
PINs are generally hidden from direct view.
Question 16 – What are the installation time for Vivint?
Answer: Three to four hours at max.
This can change, however, if one has more smart home products requirement.
Question 17 – What is the quickest way to change my Vivint password?
Answer: Ensure that the master user is the first user on the user list and then select the master user.
Click the change pin on the next screen and enter a four-digit code which will serve as the new pin from now.
Question 18 – How to cancel the agreement with Vivint?
Answer: if, for any reason, you want to end all agreements with Vivint, call the toll-free number for assistance.
The company understands that change is the routine for some individuals.
Question 19 – Can a Vivint also get hacked?
Answer: Yes
While Vivint comes with 24/7 and the best professional monitoring service, outsiders can hack from a remote location and even spy via your cameras.
Final Verdict
Vivint is, hands down, the best leader when it comes to home security and home automation systems.
Each of the Vivint models comes with some of the most advanced features like Smart Deter tech, which can detect threats that are real.
Vivint systems membership rates begin from around $49.50 for the most basic plan and go upward for more premium features.
The installation code is there by default which one has the freedom to change as well at any time.
Each of the Vivint products comes as an integrated system form having Google Nest and Alexa device support.
The installation of all the models is via extreme professionalism.
The brand takes care of everything and customizes everything for you, so get can set it as per your liking.
The system uses 24/7 monitoring, so you are never too far from the truth, and the technical team is available round the clock.
What drives Vivint is its innovation and security.
They constantly improvise and bring peace of mind to every customer and homeowner.
You sleep, and they protect and keep you connected to loved ones all the time by their smart tech.
In small, get everything from security to convenience right at your doorstep.
The different codes inside the smart tech come with default master codes, and one can easily change as per needs.
Thanks for reading!